Schedule upkeep of the glove box

From Fake News
Revision as of 20:36, 29 August 2020 by Etelux (talk | contribs) (Created page with "<br />Etelux reminds you that in addition to the regular inspection of the glove box, the every day upkeep perform of the glovebox is also needed<br /><br />1. Before and righ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


Etelux reminds you that in addition to the regular inspection of the glove box, the every day upkeep perform of the glovebox is also needed

1. Before and right after every single function, first clean the environment to make the floor dry and thoroughly clean. Then clean the gear, including the interior and outer surfaces of the glove box, the observation system, the work area, and so forth., to be cost-free of debris and cleanse.

two. Meticulously document the drinking water, oxygen content material, and fuel usage of the tools in the glove box each and every working day to stay away from inadequate gasoline pressure and lead to the gear to stop operating.

three. Spend interest to the volume of gas in the operating gas cylinder at any time and replace it in time.



4. In case of power failure, press the “vacuum pump” button on the panel to make the vacuum pump operate following electrical power on.

five. Notice: Following electrical power on, if there is a issue that it can not commence, the probability is that the vacuum pump energy cable is loosely linked. The 2nd purpose is that the vacuum pump’s possess change is not turned on.

6. When cheap glovebox want to put the sample into the glove box, use a little changeover chamber as much as achievable. Just before opening the transition door, spend attention to no matter whether the strain gauge pointer on the valve cavity is at the zero position. If it is, you can open up it right if not, you need to flip the switch underneath the valve cavity to the “filling” place to enable the gas enter the glove box transition compartment, and then flip the change again to the intermediate situation, then you can open up the transition compartment Put the sample in the doorway, and then shut the door. When positioning samples, be careful not to touch the inner wall of the changeover chamber with your palms, dress in gloves to decide and place the samples.

Doing these routine maintenance jobs can decrease the reduction charge of the glove box, prolong the service lifestyle of the glove box, and also lessen the prevalence of mishaps