The solution when the glove box encounters these faults
one. Huge and tiny warehouses can not replenish fuel
Factors: ① The air hole in the glove box foremost to the massive and tiny warehouse may be blocked by plastic film, etc . ② No matter whether the solenoid valve is not open up.
acrylic glovebox : ① Determine the situation of the air gap and clear the pipeline in accordance to the pipeline direction ② Check out the circuit and solenoid valve.
2. The big and little warehouses cannot be pumped
Causes: ① The suction holes in the huge and modest bins are blocked by plastic movie, and so forth. or the door is leaking ② The bin doorways are not closed tightly, or the seal ring of the big and modest bins is free.
Technique: ① Determine the position of the air gap and distinct the pipeline in accordance to the path of the pipeline ② Close the warehouse door and verify the size of the sealing ring ③ Examine no matter whether the functioning air strain is also low (because the big warehouse exhaust valve is a pneumatic valve).
three. The box force carries on to boost for the duration of cleansing
Cause: The cleaning valve is not opened, the intake pressure is way too substantial, and the pipeline is not sleek.
Methods: ①Ensure that the pipeline is easy, and it is very best not to bend it ②When cleaning, the relative stress in the tank is repeatedly under .five mbar.
4. glovebox chemistry of the purification column is faulty
Causes: ① The operating fuel pressure is less than .5Mpa ② The principal valve sign comments failure.
Techniques: ①Replace the functioning gasoline cylinder, or verify the force of the auxiliary gauge of the strain reducing valve at .5Mpa
five. The cycle can not be opened
Reason: Minimal-voltage or higher-voltage safety of admirer inverter.
laboratory glovebox : Following the voltage is steady, shut down and restart following 1 minute.