20 Top Tweets Of All Time About Fiat 500 Replacement Key Cost

Fiat 500 Replacement Key Fob

If your 500 remote key fob has stopped functioning, it could be time to replace the battery. However, if you replace the battery but it continues to stop working the issue may be elsewhere.

United Locksmith specializes in the creation of new keys for classic automobiles. We have all the tools and parts necessary to perform this service.

Dead Coin Battery

A dead battery is the most frequent cause of your Fiat 500 keyfob not locking or unlocking the doors. The battery of the coin cell inside the key fob will drain quickly when you don't use it often enough. If your remote is beginning to show signs of a loss of range or stopped functioning, then the battery may be dead.

her comment is here keep the battery securely inside the key fob. If the clips aren't secure, it can cause problems with contact, which can prevent the remote from receiving power. Utilizing a small screwdriver, push the clip that holds the retaining pin open to remove the battery, and replace it with a brand new one. Make sure to use a battery with the same voltage, size, and specifications as the original.

The key fob can be damaged or corroded through exposure to water. Even a brief bath in soapy water can harm the electronic chip in. It is best to keep your key fob in a dry environment.

Water Damage

Water damage may be the reason behind your key fob's not functioning properly. The rubber seals on key fobs stop them from getting damaged by a light splash or drizzle of water. However, it's essential to keep the keys out of the washing machine, the ocean, and pool.

The key fob contains an electronic chip that sends an immobilizer system of your vehicle. The chip allows the 500 to start and lock. If it gets wet, however it will not function.

Try cleaning the inside of your key fob's electronics with isopropyl Alcohol or an electronic cleaner to determine whether they're still working. It is recommended to replace the key fob if it's submerged in salt water, rather than trying to fix it yourself.

A replacement fob could cost you a bit, but it's a lot less expensive than paying to have your Fiat 500 towed to a dealership and fixed there! Plus, you can do it yourself with the simplest of steps. Just ensure you have the correct battery type before you attempt to open your key fob. You can find step-by-step instructions for any car keyfob online.

Faulty Chip

The chip located within the key fob communicates with the car's immobiliser unit to ensure the vehicle is only able to start when the correct key is used. If the chip is damaged or corrupted in any way the car won't start.

A chip that is defective can happen due to a variety of reasons, but the most common cause is water damage or an unresponsive battery. Whatever the reason, it's best to delegate the work to a locksmith since they will be able to repair the chip for you swiftly and at a cost-effective price.

If your key fob fails to function after exposure to clean water from the tap or rain, unplug the battery and clean the electronic component with a towel to ensure that it is completely dry before putting it back into. If the key fob still does not work it's probably an issue with the chip and is required to be replaced.





Many people will seek out their dealer when they are in need of a new Fiat key fob, but this could be a costly alternative. United Locksmith is the best option for you if are looking to have your Fiat key fob replaced at a reasonable cost. We have the tools and experience necessary to fix your Fiat key fob in a timely and professional way.

Faulty Receiver Module

Fiat key fobs send signals up to 50 feet to the vehicle, which allows it to unlock and close the doors (and start the vehicle if it has automatic transmissions). However there are some things that can cause the fob to stop functioning. It could be due to a dead battery water damage buttons, worn ones as well as a receiver module problem and signal interference or an electronic chip that is malfunctioning.

If the fob was placed in an area that has experienced severe trauma (such as being dropped onto a hard floor or being washed in the washer), it may not be able to communicate with the Body Control Module (BCM) of the vehicle. The BCM is a security system that can only accept signals from genuine original keys.

If this is the case, then you will need to replace your fob. A professional locksmith can handle the entire process of replacing your key including programming a new key to your 500. In fact, they could provide you with a duplicate key that works just the same way as your original fob (and costs a fraction of the cost).